Eppendorf CryoCube F570 Series - ULT Freezer
CC_F570
The Eppendorf CryoCube® F570 series of ULT freezers minimizes operating costs while providing superior protection for your critical samples. A combined insulation based on vacuum insulation panels and polyurethane foam enables extremely low energy consumption. The lab freezer CryoCube F570h needs 14% less energy than its predecessor.
Price
18944.0000
USD
$18,944.00
20214.0000
USD
$20,214.00
USD
USD
https://www.usascientific.com/cryocube-f570-series-ult-freezer/p/CC_F570
The Eppendorf CryoCube F570 series of ULT freezers (also known as ultra-low temperature freezer/-80 °C freezer) is based on a strong compressor for fast recovery to -80 °C after opening.
CryoCube F570n, 570 L, 208 V , classic interface, green cooling liquids, air cooling, handle left side, 5 shelves, 208 V/60 Hz. 130 mm wall (polyurethane insulation)
CryoCube F570h, 570 L, 115 V , classic interface, VIP, green cooling liquids, air cooling, handle left side, 5 shelves, 115 V/60 Hz. 130 mm wall (polyurethane insulation and vacuum insulation panels)
- Volume: 570 L (20.1 ft3), e.g. up to 40,000 samples
- Efficient insulation, composed of traditional insulation ("n"-version) and vacuum insulation panels ("h"-version), saves energy
- Efficient compressor control system reduces cycle times to lower energy consumption and increases freezer longevity
- Automatic vent port on front door of upright CryoCube models improves energy consumption and enables fast sample access
- Lockable main switch to prevent switch-offs by accident
- Location for chart recorder for data documentation
- Ergonomic door handle of CryoCube models based on Eppendorf PhysioCare Concept® requires less force and provides easier access
- Air-cooled as well as water-cooled versions for further energy saving
- Stainless steel interior for easy cleaning during maintenance and defrost cycles; powder-coated steel exterior
Besides sustainability, the main focus of our freezers is on ergonomic aspects. Especially the new door handle of the CryoCube models is based on the Eppendorf PhysioCare Concept: Safe grip but very light forces needed to open and close the freezer door. The interface is on eye level for easy reading of all settings. The automatic vent port enables fast re-access to your samples.
Cost of Ownership
When investing in a new ULT freezer, the product price itself is only one aspect. Others include the long-term costs of power consumption and the costs of service and spare parts. Keep in mind, a high-quality ULT freezer will do its job in the lab for 10 years or more.
Sample Safety
The CryoCube F570 series is equipped with reliable heavy-duty compressors (2-stage cascade cooling system). Quick pull-down times enable fast re-use after cleaning/defrosting of the instrument. The freezers have short recovery times after opening to provide extra sample safety.
Their temperature range is from -50 °C to -86 °C.
For even higher sample safety, the ULT freezers can be equipped with CO2/LN2 back-up systems and a chart recorder. Temperature monitor systems can be used to monitor the freezers remotely.
Sustainability for ULT freezers is a challenge: Maintaining extremely low temperatures of -86 °C for 24 hours a day, 7 days a week needs energy.
By following the epGreen concept, the Eppendorf freezer R&D team developed intelligent solutions where energy savings are combined with durable long-lasting product quality and ergonomic aspects. By using highly efficient technologies, the CryoCube F570h just needs 7.6 KWh/day. This future-oriented instrument class provides consumption levels which are ahead of most competitors within this volume class. The CryoCube F570h (115 V) is certified by ENERGY STAR®.
