A compact mixer and vortexer in one! Touch a tube to the standard adapter for quick vortexing or set specific speed and duration to mix plates and tubes.
Sharing below link with a person will let them view the same configuration you have on the screen. However, they will not be able to access your shopping cart or account information.
For a limited time, purchase the Vortex Mixer and receive the tube adapter and microplate adapters included! Select the option for "Adapters Included". No need to add the adapters separately. Offer valid through May 31, 2025.
Easy to program touchscreen, even with gloves
Quick touch mode
Increase yields with precise duration and speed controls
The Vortex Mixer is ideally suited for assay protocols that
require gentle mixing up to resuspensions that require
vigorous vortexing. All protocols are easily controlled by the digital touchscreen. It is supplied with a standard rubber
mat attachment. The standard attachment is used for mixing a single tube to 3,500 rpm. It can be used in touch mode
by applying pressure to center cup on the base plate or in
program mode via the touch screen. In both modes the timer
will count how long the program is active eliminating the
need for an additional timer on the bench. The operation can
be controlled at preset or selected speed and duration via
the touch screens. Adapters can be purchased separately.
See Care tab for specifications.
Max operating temperature
40°C /104°F
Min operating temperature
2°C / 36°F
Brand
USA Scientific
Noise
≤55 dBA
Voltage
100 to 240 V~, 50 to 60 Hz
Dimensions
200 × 130 × 103 mm
Warranty
2 years
Technical Specs & User Manual
Max Speed
Standard Attachment: 300 to 3,500 rpm
Adapter for 1.5/2.0 ml: 300 to 1,500 rpm
Adapter for microplates: 300 to 1,500 rpm
For a limited time, purchase the Vortex Mixer and receive the tube adapter and microplate adapters included! Select the option for "Adapters Included". No need to add the adapters separately. Offer valid through May 31, 2025.
Easy to program touchscreen, even with gloves
Quick touch mode
Increase yields with precise duration and speed controls
The Vortex Mixer is ideally suited for assay protocols that
require gentle mixing up to resuspensions that require
vigorous vortexing. All protocols are easily controlled by the digital touchscreen. It is supplied with a standard rubber
mat attachment. The standard attachment is used for mixing a single tube to 3,500 rpm. It can be used in touch mode
by applying pressure to center cup on the base plate or in
program mode via the touch screen. In both modes the timer
will count how long the program is active eliminating the
need for an additional timer on the bench. The operation can
be controlled at preset or selected speed and duration via
the touch screens. Adapters can be purchased separately.
